HiModel
HIMODEL 700KV OUTRUNNER BRUSHLESS MOTOR TYPE N5055/04
| Model | N5055/04 |
| Voltage Range | 3-8 cells Li-Po |
| Kv(Rpm/V) | 700 |
| Weight | 329g |
| Idle current | 1.5A |
| Power | 1560W |
| ESC requirement | 80A (not included) |
| Propeller suggestion | 12 x 6/ 11 x 10 / 12 x 12 |
, , , , , , Specifications:, , , , , , , , , , , Resistance (MΩ): 16, Wire winds: 4, , ,
Includes/Requires: Includes:1 x brushless motor 1 x cross type motor ...HiModel
HIMODEL 4500KV OUTRUNNER BRUSHLESS MOTOR W/MOUNT & ADAPTOR C1818/17
| Model | C1818/17 |
| Kv(Rpm/V) | 4500 |
| Resistance(mΩ) | 263 |
| Idle Current(A) | 0.8 |
| Adaptor output Shaft | 4 mm |
| Speed controller require | 10A |
| Cells | 6-9 Ni-Cd/Ni-Mh; 2-3 cells Li-Po |
| Weight(g) | 9g / 0.32 oz |
, , , , , , Specifications:, , , , , , , , , , , Power(W): 40, Wire Winding: 17, Length(mm):19, Diameter(mm): 18, , ,
Features: This is the micro size brushless motor. Includes/Requires: Includes:1 ...HiModel
HIMODEL 200KV 4-10S OUTRUNNER BRUSHLESS MOTOR TYPE N6354/15
| Model | N6354/15 |
| Voltage Range | 4-10 cells Li-Po |
| Kv(Rpm/V) | 200 |
| Weight | 558g |
| Idle current | 1.7A |
| Power | 2650W |
| ESC requirement | 90A (not included) |
| Propeller suggestion | 19 x 10/ 19x 12/ 20x 8 |
, , , , , , Specifications:, , , , , , , , , , , Resistance (MΩ): 68, Wire winds: 15, , ,
Includes/Requires: Includes:1 x brushless motor 1 x cross type motor ...HiModel
HIMODEL 230KV 4-10S OUTRUNNER BRUSHLESS MOTOR TYPE N6364/09
| Model | N6364/09 |
| Voltage Range | 4-10 cells Li-Po |
| Kv(Rpm/V) | 230 |
| Weight | 706g |
| Idle current | 1.7A |
| Power | 3150W |
| ESC requirement | 90A (not included) |
| Propeller suggestion | 20 x 10/ 20x 13/ 22x 8 |
, , , , , , Specifications:, , , , , , , , , , , Resistance (MΩ): 40, Wire winds: 9, , ,
Includes/Requires: Includes:1 x brushless motor 1 x cross type motor ...HiModel
FRSKY VARIOMETER SENSOR FVAS-01
| Measurement Range of Altitude | 0~9000m |
| Installation | Use double-sided tape to install the variometer sensor on any appropriate surface of the airframe. |
| Note | Wind will affect the altitude reading. |
, , , , , , Specifications:, , , , , , , , , , , Accuracy: 1m, , ,
Features: Different sensors facilitate to monitor different data, such as ...HiModel
ELECTRICAL BRIDLED-CUP ANEMOMETER
, , , , , , Specifications:, , , , , , , , , , , Electrical Bridled-cup Anemometer, wind speed range： 0-30m/s, Minimum testing speed：0.8m/s, Accuracy：±（0.3+0.03×V）m/s(v for actual speed), , ,
Includes/Requires: Includes:1 x anemometer * Only Chinese version manual is ...BevRC
DJI WOOKONG MULTI (WK-M) MULTIROTOR CONTROLLER WITH GPS
| Built-In Functions | Autopilot, Auto Hover Fail Safe |
| Multi Rotor Types | Quad-Rotor, Hex-Rotor, Octo-Rotor |
| Supported ESC output | 200Hz refresh frequencys |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels |
| Recommended Power Supply | DC 4.8 ~ 12V |
| Power Consumption | MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V) |
| Hovering Accuracy | Vertical |
| Suitable Wind Condition | < 8m/s (17.7mph) |
| Max Rotate Angle | 30° |
| Vertical Speed | 3m/s |
| Total Weight | <= 150g |
| Dimensions | Main Controller |
| IMU | 40mm x 31mm x 26mm |
| GPS & Compass | 50mm (diameter) x 9mm |
| LED Indicator | 25mm x 25mm x 7mm |
Introduction:, DJI Wookong Multi-Rotor stabilization controller is a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. Unlike others, WooKong allows the use of regular ESC commonly used in RC helicopter without any wiring modification; Heli mode setup providing a seamless transition for current Ace One AP professionals. WK-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renounce flight algorithm in autopilot and UAV. IMU damping system is rated for gas engine best in the class., Features:, GPS (inclusive) Position, Altitude hold and Heading hold, Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.),
Attitude mode maintains precise altitude hold for indoor flight while ...SDSHobby
AH600C HEXACOPTER/ SIX-AXLE FLYER RTF WITH GLASS FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 670 × 670 × 260mm |
| Axle Base | 600mm |
| Frame Weight | 565g |
| Propeller | 1147 ABS Propeller/ 3K CF Propeller |
| Take-off Weight | 1550g (3S/ 2200mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤700g) |
| Max Flying Weight | 3500g(standard battery included) |
| Flight Time | 10-15 minutes(3S/ 3200mAh battery, 1P receiver) |
| Flight Time | 15-25 minutes(3S/ 5000mAh battery, 1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Plastic Shell Not Included, Test Data:, Package Included:, AH600C Hexacopter Rack x 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This Hexacopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Carbon Fiber Arm and Plastic Motor Holder Glass Fiber Mounting ...SDSHobby
AH500C HEXACOPTER/ SIX-AXLE FLYER RTF WITH GLASS FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 560 × 560 × 260mm |
| Axle Base | 500mm |
| Frame Weight | 525g |
| Propeller | 1045 ABS Propeller/ 3K CF Propeller |
| Take-off Weight | 1410g (3S/ 2200mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤500g) |
| Max Flying Weight | 3000g(standard battery included) |
| Flight Time | 10-15 minutes(3S/ 2200mAh battery, 1P receiver) |
| Flight Time | 15-25 minutes(3S/ 4500mAh battery, 1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Plastic Shell Not Included, Test Data:, Package Included:, AH500C Hexacopter Rack x 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This Hexacopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Carbon Fiber Arm and Plastic Motor Holder Glass Fiber Mounting ...SDSHobby
MO1200L OCTOCOPTER/ EIGHT-AXLE FLYER RTF WITH CARBON FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 1150 × 1150 × 500mm |
| Axle Base | 1100mm |
| Frame Weight | 1450g |
| Propeller | 1645 3K CF Propeller |
| Take-off Weight | 3450g (6S/ 5000mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤5000g) |
| Max Flying Weight | 10000g(standard battery included) |
| Flight Time | 5-10 minutes(6S/ 5000mAh battery, 1P receiver) |
| Flight Time | 8-15 minutes(6S/ 10000mAh battery, 1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Shell Not Included, Test Data:, Package Included:, MO1200L Octocopter Rack x 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This octocopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Carbon Fiber Arm and Plastic Motor Holder Carbon Fiber Mounting ...SDSHobby
MO1200L OCTOCOPTER/ EIGHT-AXLE FLYER ARF WITH CARBON FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 1150 × 1150 × 500mm |
| Axle Base | 1100mm |
| Frame Weight | 1450g |
| Take-off Weight | 3450g (6S/ 5000mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤5000g) |
| Max Flying Weight | 10000g(standard battery included) |
| Flight Time | 5-10 minutes(6S/ 5000mAh battery,1P receiver) |
| Flight Time | 8-15 minutes(6S/ 10000mAh battery,1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Shell Not Included, Test Data:, Package Included:, MO1200L Octocopter Rack x 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This octocopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Carbon Fiber Arm and Plastic Motor Holder Carbon Fiber Mounting ...SDSHobby
MH1200L HEXACOPTER/ SIX-AXLE FLYER RTF WITH CARBON FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 1200 × 1200 × 450mm |
| Axle Base | 1400mm |
| Frame Weight | 1250g |
| Propeller | 1655 3K CF Propeller |
| Take-off Weight | 5500g (6S/ 5000mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤2000g) |
| Max Flying Weight | 7500g(standard battery included) |
| Flight Time | 8-10 minutes(6S/ 5000mAh/ 30C battery, 1P receiver) |
| Flight Time | 15-20 minutes(6S/ 10000mAh/ 30C battery, 1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Shell Not Included, Test Data:, Package Included:, MH1200L Hexacopter Rack x 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This hexacopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Carbon Fiber Arm and Plastic Motor Holder Carbon Fiber Mounting ...SDSHobby
MH1200L HEXACOPTER/ SIX-AXLE FLYER ARF WITH CARBON FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 1200 × 1200 × 450mm |
| Axle Base | 1400mm |
| Frame Weight | 1250g |
| Take-off Weight | 5500g (6S/ 5000mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤2000g) |
| Max Flying Weight | 7500g(standard battery included) |
| Flight Time | 8-10 minutes(6S/ 5000mAh/ 30C battery, 1P receiver) |
| Flight Time | 12-15 minutes(6S/ 10000mAh/ 30C battery, 1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Shell Not Included, Test Data:, Package Included:, MH1200L Hexacopter Rack x 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This hexacopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Carbon Fiber Arm and Plastic Motor Holder Carbon Fiber Mounting ...SDSHobby
MH550BG HEXACOPTER/ SIX-AXLE FLYER RTF WITH GLASS FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 580 × 580 × 240mm |
| Axle Base | 550mm |
| Frame Weight | 513g |
| Propeller | 1147 ABS Propeller/ 3K CF Propeller |
| Take-off Weight | 1468g (3S/ 3200mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤700g) |
| Max Flying Weight | 2500g(standard battery included) |
| Flight Time | 10-15 minutes(3S/ 3200mAh battery, 1P receiver) |
| Flight Time | 15-25 minutes(3S/ 5000mAh battery, 1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Not Including Shell, Test Data:, Package Included:, MH550BG Hexacopter RTFx 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This Hexacopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Plastic Arm and Plastic Motor Holder Glass Fiber Mounting Board ...SDSHobby
MH550BG HEXACOPTER/ SIX-AXLE FLYER ARF WITH GLASS FIBER MOUNTING BOARD AND RACK (NOT FOLDABLE)
| Spread Size | 580 × 580 × 240mm |
| Axle Base | 550mm |
| Frame Weight | 513g |
| Take-off Weight | 1468g (3S/ 3200mAh battery & 1P receiver included) |
| Payload | DV/ camera (≤700g) |
| Max Flying Weight | 2500g(standard battery included) |
| Flight Time | 10-15 minutes(3S/ 3200mAh battery, 1P receiver) |
| Flight Time | 15-25 minutes(3S/ 5000mAh battery, 1P receiver) |
| Wind Resistance | <4 grade |
Specification:, Features:, Not Including Shell, Test Data:, Package Included:, MH550BG Hexacopter ARFx 1, Recommended Equipments (need to buy separately):, Radio Control x 1, Warm Tips:, This Hexacopter will be delivered in parts and components, and the buyer needs to assemble it according to user manual by yourself. You’re welcome to ask us for any question.,
Plastic Arm and Plastic Motor Holder Glass Fiber Mounting Board ...